ChongMing Group (HK) Int'l Co., Ltd
CHONGMING GROUP (HK) INT'L CO., LTD.
Add to Cart
TOSHIBA Photocoupler GaAs Ired & Photo−Transistor
TLP504A,TLP504A−2
Programmable Controllers AC / DC−Input Module Solid State Relay
The TOSHIBA TLP504A and TLP504A−2 consists of a photo−transistor optically coupled to a gallium arsenide infrared emitting diode.
The TLP504A offers two isolated channels in an eight lead plastic DIP package, while the TLP504A−2 provides four isolated channels in a sixteen plastic DIP package.
• Collector−emitter voltage: 55 V (min.)
• Current transfer ratio: 50% (min.) Rank GB: 100% (min.)
• Isolation voltage: 2500 Vrms (min.)
• UL recognized: UL1577,
File no. E67349
Pin Configurations (top view)
Absolute Maximum Ratings (Ta = 25°C)
| Characteristic | Symbol | Rating | Unit | ||
| TLP504A | TLP504A−2 | ||||
| LED | Forward current | IF | 60 | 50 | mA |
| Forward current derating | ΔIF / °C | −0.7 (Ta ≥ 39°C) | −0.5 (Ta ≥ 25°C) | mA /°C | |
| Pulse forward current | IFP | 1 (100μs pulse, 100pps) | A | ||
| Reverse voltage | VR | 5 | V | ||
| Junction temperature | Tj | 125 | °C | ||
| Detector | Collector−emitter voltage | VCEO | 55 | V | |
| Emitter−collector voltage | VECO | 7 | V | ||
| Collector current | IC | 50 | mA | ||
| Collector power dissipation (1 circuit) | PC | 150 | 100 | mW | |
|
Collector power dissipation derating (1 circuit Ta ≥ 25°C) |
ΔPC / °C | -1.5 | -1.0 | mW /°C | |
| Junction temperature | Tj | 125 | °C | ||
| Storage temperature range | Tstg | −55~150 | °C | ||
| Operating temperature range | Topr | −55~100 | °C | ||
| Lead soldering temperature | Tsol | 260 (10 s) | °C | ||
| Total package power dissipation | RT | 250 | 150 | mW | |
|
Total package power dissipation derating (Ta ≥ 25°C) |
ΔPT / °C | -2.5 | -1.5 | mW / °C | |
| Isolation voltage | BVS |
2500 (AC, 1min., R.H.≤ 60%) (Note 1) |
Vrms | ||
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 1: Device considered a two terminal device: LED side pins shorted together and detector side pins shorted together.
