MSP430AFE253IPWR Microcontroller Integrated Circuit 16-bit Microcontrollers - MCU 16B MCU

MSP430AFE253IPWR Microcontroller Integrated Circuit 16-bit Microcontrollers - MCU 16B MCU

1 Features

• Low Supply Voltage Range: 1.8 V to 3.6 V

• Ultra-Low Power Consumption

  – Active Mode: 220 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA
  – Off Mode (RAM Retention): 0.1 μA

• Five Power-Saving Modes

• Ultra-Fast Wake-up From Standby Mode in Less

  Than 1 μs

• 16-Bit RISC Architecture, up to 12-MHz System

  Clock

• Basic Clock Module Configurations

  • – Internal Frequencies up to 12 MHz With Two Calibrated Frequencies

  • – Internal Very-Low-Power Low-Frequency (LF) Oscillator

  • – High-Frequency (HF) Crystal up to 16 MHz

  • – Resonator

  • – External Digital Clock Source

2 Applications

• Single-Phase Electricity Meters

• Digital Power Monitoring

  • Up to Three 24-Bit Sigma-Delta Analog-to-Digital Converters (ADCs) With Differential PGA Inputs

  • 16-Bit Timer_A With Three Capture/Compare Registers

  • Serial Communication Interface (USART), Asynchronous UART or Synchronous SPI Selectable by Software

  • 16-Bit Hardware Multiplier
  • Brownout Detector
  • Supply Voltage Supervisor and Monitor With

  Programmable Level Detection
  • Serial Onboard Programming, No External

  Programming Voltage Needed Programmable

  Code Protection by Security Fuse
  • On-Chip Emulation Module
  • Device Comparison Summarizes the Available

  Family Members
  • For Complete Module Descriptions, See the MSP430x2xx Family User's Guide

  • Sensor Applications

3 Description

The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 1 μs.

The MSP430AFE2x3 devices are ultra-low-power mixed signal microcontrollers integrating three independent 24-bit sigma-delta ADCs, one 16-bit timer, one 16-bit hardware multiplier, USART communication interface, watchdog timer, and 11 I/O pins.

The MSP430AFE2x2 devices are identical to the MSP430AFE2x3, except that there are only two 24-bit sigma-delta ADCs integrated.

The MSP430AFE2x1 devices are identical to the MSP430AFE2x3, except that there is only one 24-bit sigma-delta ADC integrated.

Device Information