ChongMing Group (HK) Int'l Co., Ltd
CHONGMING GROUP (HK) INT'L CO., LTD.
Add to Cart
LMC6036IMTX/NOPB Audio Power Amplifier IC Op Amps Low Power 2.7V Single Supply CMOS Operat
FEATURES
LMC6035 in DSBGA Package
Ensured 2.7V, 3V, 5V and 15V Performance
Specified for 2 kΩ and 600Ω Loads
Wide Operating Range:
Ultra Low Input Current:
Rail-to-Rail Output Swing
2.0V to 15.5V 20fA
– @ 600Ω: 200mV from Either Rail at 2.7V
– @ 100kΩ: 5mV from Either Rail at 2.7V
High Voltage Gain: 126dB
Wide Input Common-Mode Voltage Range
– -0.1V to 2.3V at VS = 2.7V
Low Distortion: 0.01% at 10kHz
LMC6035 Dual LMC6036 Quad
See AN-1112 (Literature Number SNVA009) for DSBGA Considerations
AEC-Q100 Grade 3 Qualified (LMC6035-Q1)
APPLICATIONS
• Filters
• High Impedance Buffer or Preamplifier
• Battery Powered Electronics
• Medical Instrumentation
• Automotive Applications
DESCRIPTION
The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package (8-Bump DSBGA) using micro SMD package technology. Both allow for single supply operation and are ensured for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its ensured 2.7V operation. This provides a “comfort zone” for adequate operation at voltages significantly below 2.7V. Its ultra low input currents (IIN) makes it well suited for low power active filter application, because it allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035/6 gives these op amps a broad range of applications for low voltage systems