
Add to Cart
SN54HC374J Programmable Logic Flip Flops Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs 20-CDIP -55 to 125
Feature
D Wide Operating Voltage Range of 2 V to 6 V
D High-Current 3-State True Outputs Can
Drive Up To 15 LSTTL Loads
D Eight D-Type Flip-Flops in a Single Package
D Full Parallel Access for Loading
Description/ordering information
These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight flip-flops of the ’HC374 devices are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs.
An output-enable (OE) input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
ORDERING INFORMATION
TA | PACKAGE† | ORDERABLE PART NUMBER | TOP-SIDE MARKING | |
−40°C to 85°C | PDIP − N | Tube of 20 | SN74HC374N | SN74HC374N |
SOIC − DW | Tube of 25 | SN74HC374DW | HC374 | |
Reel of 2000 | SN74HC374DWR | |||
SOP − NS | Reel of 2000 | SN74HC374NSR | HC374 | |
SSOP − DB | Reel of 2000 | SN74HC374DBR | HC374 | |
TSSOP − PW | Tube of 2000 | SN74HC374PWR | HC374 | |
Reel of 250 | SN74HC374PWT | |||
−55°C to 125°C | CDIP − J | Tube of 20 | SNJ54HC374J | SNJ54HC374J |
CFP − W | Tube of 85 | SNJ54HC374W | SNJ54HC374W | |
LCCC − FK | Tube of 55 | SNJ54HC374FK | SNJ54HC374FK |