ChongMing Group (HK) Int'l Co., Ltd
CHONGMING GROUP (HK) INT'L CO., LTD.
Add to Cart
LTC3411AEDD#TRPBF Power Path Management IC Switching Voltage Regulators 1.25A, 4MHz, Sync Buck DC/DC Conv
FeaTures
n Uses Tiny Capacitors and Inductor
n High Frequency Operation: Up to 4MHz
n Low RDS(ON) Internal Switches: 0.15Ω
n High Efficiency: Up to 96%
n Selectable Low Ripple (25mVP-P) Burst Mode® Operation: IQ = 40μA
n Stable with Ceramic Capacitors
n Current Mode Operation for Excellent Line and Load Transient Response
n Short-Circuit Protected
n Low Dropout Operation: 100% Duty Cycle
n Low Shutdown Current: IQ ≤ 1μA
n Output Voltages from 0.8V to 5V
n Synchronizable to External Clock
n Supports Pre-Biased Outputs
n Small 10-Lead 3mm × 3mm DFN or MSOP Package
ApplicaTions
n Notebook Computers
n Digital Cameras
n Cellular Phones Handheld Instruments
n Board Mounted Power Supplies
DescripTion
The LTC®3411A is a constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input voltage range and has a user configurable operating frequency up to 4MHz, allowing the use of tiny, low cost capacitors and inductors 1mm or less in height. The output voltage is adjustable from 0.8V to 5.5V. Internal synchronous power switches provide high efficiency. The LTC3411A’s current mode architecture and external compensation allow the transient response to be optimized over a wide range of loads and output capacitors.
The LTC3411A can be configured for automatic power saving Burst Mode operation (IQ = 40μA) to reduce gate charge losses when the load current drops below the level required for continuous operation. For reduced noise and RF interference, the SYNC/MODE pin can be configured to skip pulses or provide forced continuous operation.
To further maximize battery life, the P-channel MOSFET is turned on continuously in dropout (100% duty cycle). In shutdown, the device draws <1μA.